TRIO Smartcal Pty Ltd

	Slaughter 4320 Multi-Function Electrical Safety Tester

Click to enlarge

Slaughter 4320 Multi-Function Electrical Safety Tester
[4320]

The 4320 allows manufacturers to perform AC Hipot, DC Hipot, Insulation Resistance and Ground Bond tests in a single instrument. The 4320 offers incredible value if you want to perform multiple electrical safety tests in a single instrument. Test functionality includes a 5 KV, 20 mA AC Hipot, 6 KV, 5 mA DC Hipot, Insulation Resistance and a 30 Amp Ground Bond. Equipped with the latest technology and features the 4320 is the right solution for a variety of electrical safety testing applications.

Price: Call 1300 853 407

(ex GST)

Quantity:

Additional Information

1. Tamper proof front panel controls
This makes it possible to limit user access to the setup screens so that only authorized personnel can change test parameters.

2. Multiple Test Memories
The 4320 provides six test memories with six steps per memory. This is beneficial for manufacturers testing multiple products on one production line.

3. Low-current sense
The low current sense feature monitors the minimum level of current flow, thus ensuring that the DUT is properly connected and that the Hipot test is being performed.

4. Simple Menu Control
All parameters for the setups can be adjusted through a simple menu driven program. The easy to follow setup screens ensure that the operator correctly sets up all test parameters.

5. Electronic dwell settings
The electronic dwell control helps keep test results consistent by ensuring that the test duration is the same for each product tested.

6. Electronic ramping
Electronic ramping provides a gradual and timed method to increase output voltage to the DUT, minimizing any damage from quickly over-applying high voltage to sensitive DUTs.

7. Front panel LCD
A front panel LCD allows the operator to monitor the test. The display holds the results after a test item failure so that the operator can easily review the test results. Failure indications are clearly displayed.

8. No load setup of trip current and output voltage
This provides the operator with an easy and safe way to set trip currents and output voltages since parameters are set without the high voltage present.

9. Storage of test program
The 4320 powers-up with the same parameters that were used during the last test to avoid operator set-up errors.

10. Output voltage fine adjustment
To make the 4320 usable in all types of applications, the operator can manually bring the voltage up or down in 10 volt increments by simply pressing the up and down arrow keys. This makes it very easy to adjust the output voltage even while the instrument is in the dwell mode so you can analyze test results at different voltages.

11. Software calibration control
The 4320 is calibrated through the front panel keypad. All calibration information is stored in non-volatile memory. This allows the instrument to be completely calibrated without removing any covers and exposing the technician to hazardous voltages.

12. Current monitoring
The LCD display allows monitoring of current down to 10 microamps AC and 10 microamps DC. This allows the 4320 to be used even when test requirements only allow a very low level of acceptable leakage current.

13. Line and load regulation
This system maintains the output voltage to within 1% from no load to full load and over the line voltage range to ensure that test results remain consistent and within safety agency requirements.

14. PLC remote inputs and outputs
The standard 9- pin interfaces provide outputs for Pass, Fail, and Test in Process. Inputs include Test, Reset, Interlock, and Memory Recall. This gives the user all the basic remotes required to configure the Hipot through simple PLC relay control.

15. Flashing high voltage indicator
A flashing LED located directly over the high voltage terminal clearly indicates when high voltage is active to provide maximum operator safety.

16. Single Step Test Mode
In this mode, the 4320 can be configured to perform each test individually as a single step. This provides the manufacturers flexibility in configuring their testing procedure.

17. Insulation Resistance and Ground Bond Test Modes
This allows the operator to perform an Insulation Resistance and/or Ground Bond test with the Dielectric Withstand (Hipot) test, thus eliminating the need for a separate pieces of test equipment when IR and Ground Bond testing is required.

18. Continuous Duty Cycle Ratings
An advantage over other instruments in its class, the 4320 does not have any requirement to be shut down during the day even when used at full output.

19. Milliohm Offset Capability
This feature minimizes the effect of test lead or test fixture resistance.

20. Adjustable Output Current and Milliohm Trip Currents
The 4320 is versatile enough to meet a wide variety of safety agency specifications.

21. Fail Stop ON/OFF Mode
This allows the 4320 to be configured to continue testing after detecting a failure. All pass/fail results are displayed at the completion of the test cycle.