Test & Measurement Equipment - Sales, Service,Rental and Calibrations

The unit also has the ability to link to PC via USB and comes complete with cable and software for communications. Internal storage capacity is 1000 data points which can be downloaded to your PC.

The unique ATT (anti trip technology) ensures that RCD’s do not trip when doing Loop Impedance testing.

The large LCD display and the intuitive panel layout make using the 6016 a breeze. The all in one tester to test the entire installation.

Tests

• Continuity
• Loop Impedance
• Insulation
• RCD's (with Auto Ramp)
• PSC Testing
• PFC Testing
• Volts
• Frequency
• Phase rotation
• Earth

Features and specifications

Continuity Measurements

• Measuring range - 20/200/2000Ω (Autoranging)
• Open Circuit Voltage - > 5V ± 20%
• Short Circuit Current - > 200mA
• Accuracy 0-0.19Ω (± 0.1±Ω) 0.2-2000Ω (± 2% = 8dgt)

  Loop impedance measurements

• Ranges - 20/200/2000Ω (Autoranging)
• Accuracy - ±3%rdg+4dgt
  L-PE Testing 
• Nominal Test Current - 20Ω:6A/20ms, 200Ω:2A/20ms, 2000Ω: 15mA/500ms
  L-PE testing with Anti Trip Technology (ATT)
• Nominal Test Current - 6A/60ms, 10mA/approx 5s
  L-N/L-L Testing
• Rated Voltage - 100~500V, 50/60Hz, 20Ω:6A/20ms ±3%rdg+4dgt
• Nominal Test Current - L-N:100~300V and L-L:300~500V

  PSC (L-N/L-L)/PFC (L-PE)

• Range - 200A/20kA (Autoranging)
• Accuracy - derived from measured loop impedance
  specification and measured voltage specification.
  PSC
• Rated Voltage - 100~500V, 50/60Hz
• Nominal Test Current - 6A/20ms
  PFC
• Rated Voltage - 100~260V, 50/60Hz
• Nominal Test Current - 6A/20ms, 2A/20ms, 15mA/500ms
  PFC with Anti Trip Technology (ATT)
• Rated Voltage - 100~260V, 50/60Hz
• Nominal Test Current - L-N:6A/60ms, N-PE: 10mA/approx 5s

  Insulation measurements

• Measuring Ranges - 20/200/2000MΩ Autoranging
• Test Voltage - 250V, 500V and 1000V DC
• Output Voltage on Open Circuit
  - 250V+25%-0%
  - 500V+25%-0%
  - 1000V+20%-0%
• Rated Current - >1mA
• Accuracy
  -@250V and between 0~19.99MΩ ±(2%rdg+6dgt)
  -@250V and between 20~200MΩ ±(5%rdg+6dgt)
  -@500V or 1000V and between 0~199.9MΩ ±(2%rdg+6dgt)
  -@200V or 1000V and between 200~2000MΩ ±(5%rdg+6dgt)

  RCD Testing

• Rated Voltage - 230V AC +10% [50Hz]
• Trip Current Settings
  - RCD × 1/2 : 10,30,100,300,500,1000mA
  - RCD × 1 : 10,30,100,300,500,1000mA
  - RCD × 5 : 10,30,100mA
• Auto Ramp 10-500mA
• Accuracy
  Trip Current - +2% ~ +8% (AC Type), 0% ~+10% (A type)
  Trip Time - ±(1%rdg+3dgt)

  Volts

• Measuring Range - 25~500V
• Accuracy - ±(2%rdg+4dgt)

  Frequency

• Measuring Range - 45.0~65.0Hz
• Accuracy - ±(0.05%rdg+2dgt)

  Earth Resistance

• Measuring Range - 20/200/2000Ω (Autoranging)
• Accuracy
  3 wire earth resistance test - 20Ω: ±(3%rdg+0.1Ω)
  100Ω>Auxiliary Earth resitance - 200/2000Ω: ±(3%rdg+3dgt)

  Phase Rotation

• Rated voltage - 50~500V, 50/60Hz
• Correct Phase - "1-2-3" & CW mark
• Reverse Phase - "3-2-1" & CCW mark

  General

• Power Source - LR6x8
• Dimensions - 136(L) × 235(W) × 114(D)mm
• Weight - 1350g approx

  Standards
  IEC61010-1 CAT.III 300V Pollution Degree 2,
  IEC61557-1,2,3,4,5,6,7,:2007, -10:2001
  IEC61010-31:2002

  Included accessories:
  Main Test Lead, remote Test Lead, Distribution Board fused test lead, Earth Tests Lead and Auxiliary Earth spikes, Test Lead Carry Pouch, Carrying Bag, Instruction manual, Battery, USB Adaptor with PC software "KEW Report"

  Standard warranty
  1 Year